It is absolutely necessary to clean your ac unit filters in the AC system of your house or office. Poorly up kept filters will not only harm the energy efficiency of your whole AC system, it will also very likely impact the quality of the air you breathe inside.
You may not believe the extent of this is being overemphasized, but think about the purpose of air conditioning system filters. Filters serve to maintain the air conditioning system parts and people in the home, and over a life time and heavy usage, they build up massive amounts of dirt, microorganisms, as well as irritants.
But what if you don't want to buy new air filters? (we recommend you always should!)
Here's some DIY Air Filter cleaning tips!
An excellent cleansing solution is suggested at a minimum of twice a month and also ought to be one that involves greater than just running your filters under water. Below's is a simple overview of how to get your filters tidy and assist you keep a healthy and balanced living in the home.
1 - Open
Make certain your air conditioner is shut off.
Thoroughly get rid of the air conditioner components. You might have to utilize a screwdriver to dislodge fitted screws.
2 - Remove
Remove the filters from the air conditioning unit.
Primarily, inspect them for any overt indications of wear and tear. If you find any kind of holes or snags, do not also trouble with the cleaning; you're much better off replacing the filters as opposed to continually use them when worn will certainly hamper performance.
3 - Vacuum
If your filters don't have to be changed from splits, use a vacuum cleaner to eliminate any kind of gathered dust as well as grime. Be as detailed as you can for effective cleaning results. Take care handling the filter since, as mentioned above, rips will make the filter ineffective.
4 - Disinfect
Load a container with equal parts of water and vinegar. Ensure that whatever vessel you utilize is huge enough so that the filters will certainly be totally immersed when placed inside. The vinegar will kill unsafe microorganisms and also allergens that could have built up in the filters.
5 - Soak
Submerge the filters to soak in a cleansing solution. If you have unclean the filters, leave them for about three hours to get appropriately sanitized. Nevertheless, if the filters have actually only been used reasonably or have been recently cleaned up, soak for one hour.
6 - Drain
Remove the air conditioning filters from the cleaning solution and also allow to dry off. Do not wash the filters since doing so will turn around the effects of the sterilizing process. You can place them onto an old, tidy towel so that any kind of excess option is soaked up by the towel.
7 - Dry
Enable the filters to dry naturally while still on the towel. It is best to place the towel outside on the lawn or any place some sunshine is readily available to facilitate efficient drying.
8 - Install the Filters
Fit the filters right back into the A/C vent as well as re-install the air conditioner elements.
You can now appreciate cleaner, much more breathable air.
I've been servicing Gilbert Arizona and the entire AZ Valley for over 5 years. Your HVAC needs are always my top priority.